Products

联系方式

Hubei junyang technology co. LTD

Contact person: miss zhang
Phone: 13581315666
Telephone: 0728-5856688
Fax: 0728-5856588
Address: yuekou industrial park, tianmen city, hubei province
Email address: hbjunyangkj@163.com

How to use hydraulic hole opener correctly?

 Hydraulic perforator an advanced manual hydraulic tool that can open holes in metal plates.

Features of hydraulic perforator
Hydraulic hole opener is easy to operate, energy saving, fast speed, smooth and clean processing surface. It is not subject to the site, and can be used with location restrictions. It is safe and reliable. Hydraulic openings for light structure, beautiful, easy to carry, available for metallurgy, petroleum, chemical, electronics, electrical appliances, shipbuilding, machinery industries such as wire and pipeline installation and maintenance, such as the indicator lights, instrument switch opening, more suitable for the established instrument panel floor, switch box line electrical box wall openings.
Hydraulic perforator operation specification
1. Before the hole opening, the hole opening workpiece shall first punch a channel hole of 11.5mm with a flashlight.
2. Screw the piston rod into the screw hole of the piston cylinder, and then insert the washer into the piston rod and insert it into the concave die. Then the piston rod is put into the hole of the workpiece's guide hole, and finally the punch is screwed into the punch, so that the tool mouth of the punch and the processing surface of the punch are closely combined.
3, according to the needle in the direction shut oil cut back, and then repeatedly press press strength handle, make piston pump start work, oil pressure on long, concave and convex mold between the shear stress increases, die cut hole on the workpiece, until it is cut through.
4. Release the return oil cutting counterclockwise so that the oil pressure can be completely unloaded. After the above 4 steps operation procedure completed the hole opening operation.
5. Screw down the convex mould, remove the hair plate in the concave mould, and clean the mould in block letters.
Powered by CmsEasy